After the production of plastic appearance parts, in order to protect the surface appearance, usually on the outer surface of the plastic appearance parts wrapped in a layer of protective film, effective prevention of dust, dirt, etc. to fall on the surface of plastic appearance parts, but also effective prevention in the transportation or handling process, accidentally caused scratches on the surface of plastic appearance parts, by wrapping protective film to effectively achieve the purpose of plastic appearance parts of beautiful and easy to clean.
Lefu laminating machine, for the existing plastic appearance parts laminating situation to improve, reasonable design, ingenious idea, simple, practical, through the laminating machine laminating plastic appearance parts consistency, greatly improve the efficiency. It has a good wrap of plastic appearance parts, avoiding the existing phenomenon of poor edge wrap, and improving the appearance quality of the product.
1. Mount the cold laminator on a special stand and place it on a solid and firm worktable. Then make a special platform for laminating, with a height 5mm below the edge of the laminator, a width of 1600mm, and a length of 1 meter or more.
2、Place the material that needs to be laminated or run the cold laminator on the iron roller in front of the cold laminator and enter the cold laminator with the coating side facing up.
3、Adjust the adjusting hand wheel on the cold laminator, lift the rubber roller, and then extrude the material from the two rubber rollers for 10cm.
4、If you need to laminate the film, you need to extend the cold laminating film 10 cm from the two adhesive rollers of the cold laminator and put it on top of the consumables. The film and the consumables must be aligned on both sides.
Lefu cold laminator laminating high quality, strong picture quality, whether digital thermal sublimation printer, whether studio image wedding photography, graphic express advertising light box production, or traditional printing, a variety of inkjet printing color advertising posters; personalized indoor or outdoor personal portrait, high definition, high appreciation value, suitable for outdoor use or long-term indoor preservation of corporate videos, product posters, giant studio photo Post-production, cold framing film can be used with Lefu cold mounting machine.